Raspberry pi I/O

 

More work to do on this pi, I gotta code the pins so that eventually I can hook them up to the valve.

In the meantime, I have researched and found that my design has elements similar to other automated irrigation systems.Understanding the Raspberry Pi GPIO Pinout

Comments

Post a Comment

Popular posts from this blog

Presenting my project

Image
 Yesterday, I got the opportunity to present my automatic watering machine to a group of engineers from the MTA. It was online and lasted approximately 10-15 minutes, where they asked questions and I explained to them the inner workings and reason for my machine. Today we got a letter detailing how they liked my presentation and how I demonstrated a level of hardware and software proficiency that surpasses that of many graduating college students, which needless to say has made me very happy. I hope I get more opportunities like this in the future to demonstrate my machine that would allow it to make an impact. Below is a slide from my presentation.
Read more

Code overview

Image
 First, the code defines the chip select, the data input/output, and the clock on the ADC0832-N chip. The input and output ports were connected due to the fact that there would never be a time where neither input nor output are high-z. In addition it made wiring simpler. Chip select goes high before going low in order to start the conversion. Then, the data in sets the chip to single, because I am not comparing two values. Afterwards, on the third clock, the chip goes odd. On the falling edge, when the clock goes zero off of the third clock, the chip switches to input. Then the chip loops clock 8 times, while it reads the input. Then, it loops another 8 times while reading the reverse input in reverse, and confirms if the two readings are the same. After this, chip select goes high, severing the conversion, the chip goes output, and the voltage is gotten by multiplying the analog value by 5/255
Read more

Water in Israel

 I just watched a documentary about how the agricultural industry in Israel was able to develop. More specifically, how it was able to develop from what was previously desert due to how technology surrounding watering systems for farms has advanced. I found out that one of the biggest losses of water for Israel was farming, and that a newly developed technology called drip irrigation allowed for less water to be budgeted towards agriculture. Drip irrigation is a different system of soil moisture management compared to what I've developed, but it certainly seems intriguing with the time that it took to be implemented into Israeli farms.
Read more